SDI Building Specifications

The SDI Building was designed specifically for high tech office, laboratory, and light manufacturing. Zoning is LI-2.

Specification Description
Area
29,400 sq ft on two levels. Upper level 18,000 sq ft; lower level 11,400 sq ft.
Parcel Size
approx 3.3 acres
Dates
  • 1982 (Initial Construction Date)
  • 1991 (Addition Date)
Financial Data
  • Annual Taxes: $26,400
  • Replacement Cost (estimated): $3,300,000
Building Features
  • Designed to be highly energy efficient.
  • Building can be sub-divided into three (3) separate areas if desired; each with individual entries.
  • City water and sewer.
  • Water well used for lawn sprinklers and irrigation.
  • Consumer’s Power gas service.
  • Available parking spaces: 67 (land available for additional 45 spaces.)
  • Fully air conditioned.
  • Keyless entry system.
  • Fully “sprinkled” for fire protection.
  • Alarm system.
  • Compressed air available to several of the laboratory spaces.
  • Paint booth.
Building Aesthetics
  • Situated in a “park like” setting.
  • Professionally landscaped and maintained.
  • Employee outdoor lunch area on upper level.
  • Employee gazebo on lower level.
  • Adjacent land is designated as wildlife area and will not be developed.
Building Condition
  • Drives and parking areas repaved in 2011.
  • Roof replaced in 2011
  • All HVAC equipment replaced and maintained on a regular basis.
Internal Features (Upper Level)
  • Ceiling height 8 ft.
  • Two entry ways with lobbies.
  • 4 Employee rest rooms (tile).
  • 3 Executive offices with private rest rooms (tile).
  • 2 conference rooms.
  • 1 Employee lunchroom.
  • Approximately 20 offices, both fixed and divider defined, (most carpeted).
  • 5 Laboratory (light manufacturing) areas.
  • 2 Shipping docks; 1 ground level, 1 truck bed level.
Internal Features (Lower Level)
  • Ceiling height 7 ft-6in.
  • One entry way with lobby.
  • 4 employee rest rooms (tile).
  • 1 Employee lunchroom.
  • 1 Shipping area (ground level), with high bay ceiling (24 ft).
  • Approximately 11 areas which are considered “flex space”.
    – (offices/laboratories/manufacturing/shipping)
  • Internal conveyor connection from lower to upper area for shipping.
  • Internal parts elevator to upper floor.
  • Employee elevator and two stairways to upper floor.

Related Links